Table of Contents
Advertisement
5.1.9.
FDB Table
Select "Basic Config" and "FDB" and then "FDB Table" to open the screen shown in
Figure 5-9. This screen shows the MAC addresses learned in the FDB table for each
port.
Screen Description
Aging Time
Displays the time for which an automatically learned FDB entry is retained.
It is equal to the time after receiving the last packet.
The factory default setting is 300 seconds (5 minutes).
Narrowing-down
Narrows down records by the specified VLAN ID.
VLAN
Narrowing-down
Narrows down records by the specified port number.
Port
MAC Address
Displays the MAC address in the FDB table.
Port Number
Displays the port to which the MAC address has been assigned.
Figure 5-9 FDB Table
40
Advertisement
Table of Contents
