Setting Menu Table - Panasonic AV-HS450N Operating Instructions Manual

3. Setting menu table

p The menu configuration for the 2D mode is different from the one for the 3D mode.
For details on the menu configuration in the 3D mode, refer to the Operating Instructions of the AV-HS04M7D
board.
p A setting is entered when an item displayed ( ) is selected and then the [F1], [F2], [F3], [F4] or [F5] switch is
pressed.
(It will not be entered unless the switch is pressed.)
Sub menu
Menu
Turn F1 to select.
KEY KEY 1
KEY
KEY 2
Adjust
KEY 3
FillMatt
KEY 4
Edge
KEY 5
EdgeCol
KEY 6
WIPEPos
KEY 7
SQPos
KEY 8
FlyKEY
KEY 9
Modify
KEY 10
Mask
Parameter 1
Turn F2 to select. Turn F3 to select. Turn F4 to select. Turn F5 to select.
Parameter Type
Setting range Lum, Linear,
Chroma, Full
Default value Linear
Parameter Clip
Setting range 0.0 to 108.0
Default value 0.0
Parameter Hue
Setting range 0.0 to 359.9
Default value 0.0
Parameter Type
Setting range Off, Border, Drop,
Shadow, Outline
Default value Off
Parameter Hue
Setting range 0.0 to 359.9
Default value 0.0
Parameter X-Pos
Setting range −100.00 to 100.00 −100.00 to 100.00
Default value 0.00
Parameter X-Pos
Setting range −100.00 to 100.00 −100.00 to 100.00
Default value 0.00
Parameter X-Pos
Setting range −100.00 to 100.00 −100.00 to 100.00 0.0 to 400.0
Default value 0.00
Parameter Light
Setting range On, Off
Default value Off
Parameter Mask
Setting range Off, Manual, 4:3
Default value Off
Parameter 2
LumKey
ChrmOn, ChrmOff Bus, Matte
ChrmOff
Gain
0.0 to 200.0
100.0
Sat
0.0 to 100.0
0.0
Width
0 to 4
2
Sat
0.0 to 100.0
0.0
Y-Pos
0.00
Y-Pos
0.00
Y-Pos
0.00
Invert
On, Off
Off
31
Parameter 3 Parameter 4
Fill PVW
Auto, Off, On
Bus Auto
Density Invert
0.0 to 100.0 On, Off
100.0 Off
Lum Load
0.0 to 108.0 White, Yellow,
Cyan, Green,
Magenta, Red,
Blue, Black
100.0 White
Direc
0, 45, 90, 135, 180,
225, 270, 315
0
Lum Load
0.0 to 108.0 White, Yellow,
Cyan, Green,
Magenta, Red,
Blue, Black
0.0 Black
CopyTo
Displays the copy
destination.
CopyTo
Displays the copy
destination.
Size
100.0