Vlan Filter Configuration - Panasonic M24PWR Operation Manual

4.7.10.b. VLAN Filter Configuration
On the IGMP Snooping Configuration Menu, pressing "V" opens the Show
IGMP Snooping VLAN Filter Table Menu as shown in Fig. 4-7-55. On this
screen, you can configure VLANs to be filtered out from the target of IGMP
PN23249K/PN23249A Local Management System
IGMP Snooping Configuration -> Show IGMP Snooping VLAN Filter Table Menu
VLAN ID Status
------- ------------
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page
[P]revious Page
Command>
Enter the character in square brackets to select option
Snooping.
Screen Description
VLAN ID
Status
Available commands are listed below.
N Show the next page.
Press "N." The screen displays the next page.
P Show the previous page.
Press "P." The screen displays the previous page.
S Set a VLAN to be filtered.
Press "S." The command prompt changes to "Enter VLAN ID >." Set the VLAN
ID with a value between 1 and 4094.
Q Return to the previous menu.
Fig. 4-7-55 VLAN Filter Configuration
Displays VLAN ID.
Displays the filter status.
182
[S]et VLAN Filter
[Q]uit to previous menu