3.4. Port Configuration
Configure the port setting in "Interface configuration mode." Confirm the
configuration information by executing the "show interface info" command
in "Privileged mode."
Command to show the port information
M24eG#
Command to show the detailed port information
M24eG#
Command to enable the port status
M24eG(config-if)#
Command to disable the port status
M24eG(config-if)#
Command to set the port mode
M24eG(config-if)#
Command to enable the flow control
M24eG(config-if)#
Command to disable the flow control
M24eG(config-if)#
Command to set the port name
M24eG(config-if)#
Command to enable the Auto MDI
M24eG(config-if)#
Command to disable the Auto MDI
M24eG(config-if)#
Command to enable the jumbo frame
M24eG(config)#
Command to disable the jumbo frame
M24eG(config)#
show interface info
show interface [<interface name>]
no shutdown
Shutdown
speed-duplex < auto | {10|100}-half | {10|100}-full >
flow-control
no flow-control
name <string>
mdix auto
no mdix auto
Jumbo
no jumbo
77