Ring Protocol Configuration - Panasonic PN28058 Operation Manual For Cli

4.11. Ring Protocol Configuration

Configure the ring protocol in "Ring configuration mode." Display the basic infor -
mation by entering "show rrp status <Domain Name>" in "Privileged mode."
Ring protocol enable command
Global configuration mode
Ring protocol disable command
Global configuration mode
RRP domain creation configuration command
Global configuration mode
RRP domain delete command
Global configuration mode
Ring control mode configuration command
Ring configuration mode
Control VLAN configuration command
Ring configuration mode
Data VLAN configuration command
Ring configuration mode
Primary port configuration command
Ring configuration mode
Secondary port configuration command
Ring configuration mode
Health check timeout configuration command
Ring configuration mode
Health check interval configuration command
Ring configuration mode
Ring protocol configuration display command
Privileged mode
Note: The ring protocol function and the Internet Mansion mode cannot be used
simultaneously.
Disable the Loop detection and blocking function in advance for a port config -
Note:
uring the ring protocol.
enable rrp status
no enable rrp status
rrp domain <Domain Name>
no rrp domain <Domain Name>
rrp type {master | transit}
control vlan<vlan-id>
data vlan<vlan-id>
primary port <port number>
secondary port <port number>
fail-period <seconds>
polling-interval <seconds>
show rrp status <Domain Name>
55