Delta SCARA Robot System User Manual
4.8.7 DCS controller dimensions
DCS controller dimensions are as shown in Figure 4.7 below.
Controller installation notes:
Do not put your finger or foreign matter into
injury hazards.
This
controller
does not have explosion-proof or splash-proof structures, so do not place it at
locations that are too humid or else it can be easily splashed by liquids.
Before moving, installing, wiring and using, please read this Manual carefully.
Do not randomly stack objects on top of the controller, and do not bump into the controller.
Do not install the
Do not plug or unplug the power while the power is on the ON status or while operating as doing
so may cause damages to the internal components of the robot orcontroller.
The input power of the controller is 220V~, 50/60Hz; do not input non-specified voltages as doing
so may cause the controller to burn or inaccurate robot movements.
381mm
Figure4. 7 Controller dimensions figure
controller in a location subjecting to excessive
66
453mm
the
heat-radiating fan of controller, or it may cause
vibration.
SCARA CE Series
268mm