Delta SCARA Robot System User Manual
7.2.7 Direct current output connector
There is a DC output connector on the power control box interface for customers to connect DI/O
signals.
The connector location is as shown in Figure 7.43 and the pin definitions are as shown in Table 7.15.
Note:
The power provided by the DC output connector is DC24V/1A. Do not use this connector with other
1.
DC power or else it will cause the fuse to burn.
Do not randomly change the fuse of this DC output connector or else it might result in burning of
2.
the cable.
Table7. 15 DC output pin definition
Pin
1
2
3
Figure7. 43 DC output connector location
Name
DC24V
DC24G
-
131
Description
Connect to the positive potential
Connect to the negative potential
-
SCARA CE Series