Robot Connectors; Figure7. 8 Robot Connecting Seat; Figure7. 9 Robot Standard Connection Cable - Delta SCARA DRS40L Series User Manual

Delta SCARA Robot System User Manual SCARA CE Series

7.2.2 Robot connectors

Detachable cables are used for the connection between the robot and the DCS robot control box; the
two ends are connected with heavy load connectors. Please make sure the buckles are locked in
properly before turning on the power. The installation of the power control box connector is as shown in
Figure 7.8 and the standard connection cables are as shown in Figure 7.9.
Please note the connector directions; both ends of the connector have foolproof designs so forced
connection will cause damages to the connector and the equipment.
The standard length of the cables between the robot and control box is 3m; customers shall not extend
the cables on their own as doing so will cause problems such as weakening the signals and causing the
equipment to malfunction.

Figure7. 8 Robot connecting seat

Figure7. 9 Robot standard connection cable

107