Delta SCARA Robot System User Manual
2.2.2 Controller installation
Controller installation notes:
The power control box uses forced fan cooling; in order to keep the cooling cycle working well,
1.
when installing
the robot power control
and the baffle (wall), or else it may cause malfunctioning. Please refer to the power control box
installation space shown in Figure 2.9.
The ventilation holes must not be blocked during installation; please keep a distance of 150mm or
2.
above.
Do not topple over the power control box as doing so will cause it to malfunction.
3.
Controller power switch and other locations should be from the ground 0.6m
4.
make it easier for users to operate.
box, sufficient room must be left with neighboring objects
Figure2. 9 Power control box installation space
37
SCARA CE Series
to
1.7m between to