DRV70L/90L Series Manual
Figure 2.1 shows the DCV controller dimensions.
Controller Installation Notes:
Do not put your fingers or foreign matter into the DCV controller cooling fan to prevent injury.
This DCV controller does not have explosion-proof or splash-proof containment, so do not use it in
locations that are too humid or can be splashed by liquids.
Read this manual carefully before moving, installing, wiring and using this equipment.
Do not stack objects on top of the DCV controller, and do not bump into the DCV controller.
Do not install the DCV controller in a location that is subject to excessive vibration.
Do not plug or unplug the power while the DCV controller is ON status or operating to prevent
damage to the robot's and DCV controller's internal components. The input power of the DCV
controller is 200–230 Vac, 50/60 Hz. Do not connect non-specified voltages to prevent damage to
the DCV controller or inaccurate robot movements.
Figure 2.1 Controller appearance and dimensions
22