Installation And Operation - Delta SCARA DRS40L Series User Manual

Delta SCARA Robot System User Manual
8. Installation and
operation
This chapter will introduce how to install, wire, connect the robot and the execution method
for initial operation.











Please read this manual carefully before usage in order to ensure proper
usage and the safety of the maintenance staff.
Due to operational environment and operator safety considerations, our
company will provide dedicated training for the operators of different robot
applications in order to ensure usage safety. Please contact our company
or your local dealers if training is needed.
Please workers with related professional knowledge or qualified engineers
to perform the installation and wiring of the robot.
This robot DRS CE series can only be used with our company's controller
DCS-1B00-CA. Please do not modify the machine or wiring by yourself or
use with other controllers. Our company will not be held responsible for any
injuries or fatalities caused by accidents that resulted from doing so.
Please use our company's handheld teaching pendant and installed it on
the controller DCS-1B00-CA to perform manual operations and edit
programs.
Do not on flammable or toxic processing lines.
Carefully select the model according to the loading quality; do not try to
expand to the specified capacity.
The robot is a partially completed machine; the assembly and construction
of the protection and safety circuit should be responsibility of the final
system integrator.
All children and visitors should keep a safe distance from the processing
area.
Do not wear loose clothes, ties, rings or bracelets, and wear protection
cases to protect long hairs. These things can be easily caught in the
machine by accident and causing injuries to the staff or other dangers
during operation.
Please turn off the power, isolate the power properly and wait for the robot
140
SCARA CE Series