Storing A Program For Build Job - Xerox PrimeLink B9100 User Manual

Stored Programming

Storing a Program for Build Job

The Build Job feature allows you to apply different settings to various segments of a job. You can use
Stored Programming to store a program that contains specific settings to be used with the Build Job
feature. When using Build Job, you can recall a stored program and apply it to a specific segment of
the job. If each job segment requires different settings, you can select a different stored program for
each job segment, as needed.
1. Press the Machine Status button.
2. Touch the Tools tab. In the Features column, touch Stored Programming.
3. Touch Store Build Job.
4. From the numbered list, select an available numbered button.
Note:
• To return to the previous screen or to advance to the next screen, touch the up and
down arrows.
• A tone is generated while registering the program to job memory. To change the tone
volume, refer to Stored Programming Tone in the System Administrator Guide.
• When storing a program for Tray 5, to ensure that the program does not become
corrupted, store both the paper size and the paper type. If the program becomes
corrupted, you cannot select the program.
The tabs for the Copy feature appear and the printer begins to beep, which indicates that the
printer is in programming mode.
5. Set the feature options that you want to apply to a segment of the job. After changing each
setting, touch Save.
6. To end programming mode and store the program, press the Start button or the Clear All button.
Note:
• To cancel the registration, press the Interrupt button.
• At the time that the Build Job program is stored, the assigned program name is (No
Name). To rename a stored program, refer to
• The Build Job icon is assigned automatically to the stored program and cannot be
changed.
7. Load the first original document into the document feeder or on the document glass.
8. Set the feature options for this document, as needed. After changing each setting, touch Save.
130 Xerox ® PrimeLink
User Guide
® B9100/B9110/B9125/B9136 Copier/Printer
Naming or Renaming a Stored Program.