Media Type; Sample Copy; Mirror Image - Xerox Wide Format 6604 User Manual

Printing and Copying Documents
3. Set up the features on the Advanced Features tab for the documents you are
scanning.

Media Type

The media types are Bond, Vellum or Film. If the media type chosen is not loaded in the
printer Media Roll Tray or Manual Feed-in Shelf, the selection is not available (grayed
out).
The default is Bond.
1. Select Copy on the Services menu.
2. Select the Advanced Settings tab.
3. Select Media Type and select the type desired from those available.
NOTE
If the Media Type desired is not selectable, load the desired media and program
the media source.

Sample Copy

The Sample Copy feature produces a proof copy of a section in the middle of the originals
image. You can then accept or modify the copy settings before making copies, or reject
and cancel the job.
The factory default settings is Disabled, no sample copy generated.
1. Press the Services button on the Control Panel.
The Services menu will display with Copy as an option.
2. Select Copy.
The Copy screen will display.
3. Select the Advanced Settings tab.
4. Select Sample Copy and one of the two choices.

Mirror Image

The Mirror Image feature enables you to reverse the left and right sides of the original,
the top and bottom of the original or a combination of both.
Perform the following steps to set up Mirror Image:
1. Select Copy on the Services menu.
2. Select the Advanced Settings tab.
3. Select Mirror Image.
4. Select Off, X, Y, or XY.
2-20 ®
Xerox Wide Format 6604/6605 Solution
User Guide