Fan Speed Switch (Machines with Two−Post ROPS Extension
Operator Fan Kit)
Testing
Groundsmaster
®
4500-D/4700-D
19245SL Rev A
1
g276047
1.
Fan speed switch
2.
Control knob
The fan speed switch is attached to the overhead control panel
switch is used to select the fan speed (off, low, medium, or high).
1. Park the machine on a level surface, lower the cutting decks, and shut off
the engine. Remove the key from the key switch.
2. To access the switch, remove the sunshade from the top of the ROPS
extension.
3. Disconnect the machine wire harness from the fan speed switch.
g276048
3
Figure 225
3.
Control panel
Figure 226
Page 6–65
2
(Figure
Electrical System: Component Testing
225). The