Servicing The Front Led Indicator Module (Fru); Remove The Front Led Indicator Module - Oracle X8-2L Service Manual

Servicing the Front LED Indicator Module (FRU)

The following section describes how to service the front LED indicator module. The front LED
indicator module is a field-replaceable unit (FRU). For more information about FRUs, see
"Illustrated Parts Breakdown" on page 20
Caution - The front LED indicator modules should be removed and replaced only by authorized
Oracle Service personnel.
Ensure that all power is removed from the server before removing or installing a
Caution -
front LED indicator module. You must disconnect the power cables before performing this
procedure.
Caution - These procedures require that you handle components that are sensitive to
electrostatic discharge. This sensitivity can cause the component to fail. To avoid damage,
ensure that you follow electrostatic discharge safety measures and antistatic practices. See
"Electrostatic Discharge Safety" on page
This section covers the following procedures:
"Remove the Front LED Indicator Module" on page 167
■
"Install the Front LED Indicator Module" on page 171
■
Related Information
"Troubleshooting Using the Server Front and Back Panel Status Indicators" on page 30
■

Remove the Front LED Indicator Module

Prepare the server for service.
1.
and "Field-Replaceable Units" on page
52.
Servicing the Front LED Indicator Module (FRU)
22.
167