Siemens Simovert Masterdrives Compendium page 1365

Parameter Description
U618* Selection of the settable input value for the table (X-axis)
X-SetV Tab
Function diagram [839.5]
2618
U619* The parameter selects the binector for setting the table to
S.Set Tab the X-value defined via U618.
2619 Function diagram [839.4]
U620* The parameter defines the width of the table in [LU]. The
Table Width table width is the maximum value of the X coordinate.
2620 Index 1: for table 1
Index 2: for table 2
Index 3: for table 3
Index 4: for table 4
Index 5: for table 5
Index 6: for table 6
Index 7: for table 7
Index 8: for table 8
Changing this parameter sets the status of the associated
table to "untested"!
Function diagram [839.4]
U621* Synchronizing table:
S.Tab Sync
If the operating mode "scaling of Y-axis" (U614) is at 0,
2621 this binector is not effective.
A jump at the output has to be expected for the "table"
operating mode.
If the operating mode "scaling of the Y-axis" (U614) is at
1, this binector is effective
0 = Scaling is adopted in the next axis cycle
1 = Scaling is adopted immediately
In function diagram [839.4]
U622* Fixed setting value of X-axis for table. The setting
SetV Tab (X) procedure is carried out via the binector selected by U619.
2622 Function diagram [839.4]
U623* Fixed values for scaling of the X-axis of the table.
FixScaleX-Axis
Scaling of the X-axis means that the input value of the
2623 table (x-axis) is multiplied by a factor. The factor is made
up of a numerator (U623.1) and a denominator (U623.2).
Scaling of the X-axis acts in the same way as a gearbox
connected ahead of a cam.
Function diagram [839.1]
Siemens AG 6SE7087-6QX70 (Edition AL )
SIMOVERT MASTERDRIVES Compendium Motion Control
Data Read/write
Init: 823 Menus:
Unit: - - Parameter menu
Indices: - + Technology
Type: L2 ,K + Synchronism
,K - Upread/free access
Changeable in:
- Ready to switch on
- Operation enabled
Init: 0 Menus:
Unit: - - Parameter menu
Indices: - + Technology
Type: L2 ,B + Synchronism
- Upread/free access
Changeable in:
- Ready to switch on
- Operation enabled
index1: 4096 Menus:
Min: 0 - Parameter menu
Max: + Technology
2147483647 + Synchronism
Unit: - - Upread/free access
Indices: 8 Changeable in:
Type: I4 - Ready to switch on
- Operation enabled
Init: 0 Menus:
Unit: - - Parameter menu
Indices: - + Technology
Type: L2 ,B + Synchronism
- Upread/free access
Changeable in:
- Ready to switch on
- Operation enabled
Init: 0 Menus:
Min: - - Parameter menu
2147483648 + Technology
Max: + Synchronism
2147483647 - Upread/free access
Unit: - Changeable in:
Indices: - - Ready to switch on
Type: I4 - Operation enabled
index1: 1 Menus:
Min: -32767 - Parameter menu
Max: 32767 + Technology
Unit: - + Synchronism
Indices: 2 - Upread/free access
Type: I2 Changeable in:
- Ready to switch on
- Operation enabled
205