Siemens Simovert Masterdrives Compendium page 1326

Parameter Description
U393 Function parameter for entering the wobble amplitude as
Wobb Amplitude a relation to the input signal amount (setpoint)
2393
U394 Function parameter for entering the frequency of the
Wobb Freq wobble signal
2394
U395 Function parameter for entering the phase shift of the
Wobb Phase Shift wobble signal compared to the master synchronizing
signal. At a value of 360°, the synchronizing signal is not
2395 observed; coasting wobbling takes place.
U396 Function parameter for entering the amount of the
Wobb P-Step negative P step as a percentage of the wobble amplitude
2396
U397 Function parameter for entering the amount of the positive
Wobb P-Step P step as a percentage of the wobble amplitude.
2397
U398 Function parameter for entering the time portion of the
Wobb Sampl Ratio increasing edge of the wobble signal
2398
n399 Visualization parameter for displaying the wobble signal.
Wobb Gen Outp
2399
U400* Parameter for selecting the double word connector for the
S.ConnAnaDel_1 1st analog delay element.
2400
U401* Parameter for entering the delay cycles of the 1st analog
AnaDelayEl_1_T delay element
2401
Siemens AG 6SE7087-6QX70 (Edition AL )
SIMOVERT MASTERDRIVES Compendium Motion Control
Data Read/write
index1: 0,00 Menus:
Min: 0,00 - Parameter menu
Max: 20,00 + Free blocks
Unit: % - Upread/free access
Indices: 4 Changeable in:
,FDS - Ready to switch on
Type: O2 - Operation enabled
index1: 60,0 Menus:
Min: 0,1 - Parameter menu
Max: 120,0 + Free blocks
Unit: 1/min - Upread/free access
Indices: 4 Changeable in:
,FDS - Ready to switch on
Type: O2 - Operation enabled
index1: 360 Menus:
Min: 0 - Parameter menu
Max: 360 + Free blocks
Unit: ° (alt) - Upread/free access
Indices: 4 Changeable in:
,FDS - Ready to switch on
Type: O2 - Operation enabled
index1: 0,00 Menus:
Min: 0,00 - Parameter menu
Max: 100,00 + Free blocks
Unit: % - Upread/free access
Indices: 4 Changeable in:
,FDS - Ready to switch on
Type: O2 - Operation enabled
index1: 0,00 Menus:
Min: 0,00 - Parameter menu
Max: 100,00 + Free blocks
Unit: % - Upread/free access
Indices: 4 Changeable in:
,FDS - Ready to switch on
Type: O2 - Operation enabled
index1: 50 Menus:
Min: 0 - Parameter menu
Max: 100 + Free blocks
Unit: % - Upread/free access
Indices: 4 Changeable in:
,FDS - Ready to switch on
Type: O2 - Operation enabled
Dec.Plc.: 1 Menus:
Unit: % - Parameter menu
Indices: - + Free blocks
Type: I2 - Upread/free access
Init: 0 Menus:
Unit: - - Parameter menu
Indices: - + Free blocks
Type: L2 ,K - Upread/free access
,K Changeable in:
- Ready to switch on
- Operation enabled
Init: 0 Menus:
Min: 0 - Parameter menu
Max: 32 + Free blocks
Unit: - - Upread/free access
Indices: - Changeable in:
Type: O2 - Ready to switch on
- Operation enabled
166