Siemens Simovert Masterdrives Compendium page 1270

Parameter Description
P835* Service parameter, only for Siemens service personnel
CtrlBootOptPCB
835
not Compact PLUS
P835* Service parameter, only for Siemens service personnel
CtrlBootOptPCB
835
Compact PLUS only
P836* Service parameter, only for Siemens service personnel
DataOptPCBBoot
836
P837* Service parameter, only for Siemens service personnel
state TEST
Selection of trial operation, only for manufacturer
837
r838 Service parameter, only for Siemens service personnel
UCE/OvTestResult
The result of the UCE and Imax test can be read out in
838 this parameter. The result is coded bit-wise.
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
P839* Service parameter, only for Siemens service personnel
AdrConnector
Copies the contents of an address into a connector value,
839 thus enabling any random C16x variable to be wired and
any random (internal) variables to be traced. The address
of the variables can be determined from the M66 file.
The 16-bit address offset has to be entered in the index.
Index 1-4 RAM offset in sector 0
Index 5-8 DPR offset in the DPR sector
Function number 258 (Parameter U952.58)
Index -> connector number
1 -> K0434
2 -> K0435
3 -> K0436
4 -> K0437
5 -> K0438
6 -> K0439
7 -> K0440
8 -> K0441
Siemens AG 6SE7087-6QX70 (Edition AL )
SIMOVERT MASTERDRIVES Compendium Motion Control
Overvoltage
Overcurrent phase W
Overcurrent phase V
Overcurrent phase U
Not used
UCE phase W
UCE phase V
UCE phase U
Data Read/write
index1: 0 Menus:
Min: 0 - Parameter menu
Max: 2 - Upread/free access
Unit: - Changeable in:
Indices: 7 - Ready to switch on
Type: O2
index1: 0 Menus:
Min: 0 - Parameter menu
Max: 2 - Upread/free access
Unit: - Changeable in:
Indices: 3 - Ready to switch on
Type: O2
index1: 0 Menus:
Min: 0 - Parameter menu
Max: 65535 - Upread/free access
Unit: - Changeable in:
Indices: 100 - Ready to switch on
Type: O2
index1: 0 Menus:
Min: 0 - Parameter menu
Max: 65535 + Functions
Unit: - - Upread/free access
Indices: 3 Changeable in:
Type: O2 - Ready to switch on
- Operation enabled
Dec.Plc.: 0 Menus:
Unit: - - Parameter menu
Indices: - + Functions
Type: V2 - Upread/free access
index1: 0 Menus:
Unit: - - Parameter menu
Indices: 8 - Upread/free access
Type: L2 Changeable in:
- Ready to switch on
- Operation enabled
110