Siemens Simovert Masterdrives Compendium page 1325

Parameter Description
U385* BICO parameter for selecting a parameter from which a
S.T (total1) torque value for the torque addition block is to be read in.
2385
U386* BICO parameter for selecting a parameter from which a
S.T (total2) torque value for the torque addition block is to be read in.
2386
U387* BICO parameter for selecting a parameter from which a
S.T (total3) torque value for the torque addition block is to be read in.
2387
U388* Moment of inertia in % (for calculating the acceleration
Mom_Inertia.J torque)
2388
U389* Selection of calculation of the acceleration torque:
Ber.M(accel) 0: with scaled moment of inertia
1: with moment of inertia in %
2389
U390* BICO parameter for selecting the connector for the input
S.WobbSetp Unwo of the wobble generator
2390
U391* BICO parameter for selecting the binector for the master
S.Wobb SyncInp synchronizing signal of the wobble generator
2391
U392* BICO parameter for selecting the binector for wobble
S.Wobb Rel release
2392
Siemens AG 6SE7087-6QX70 (Edition AL )
SIMOVERT MASTERDRIVES Compendium Motion Control
Data Read/write
index1: 0 Menus:
Unit: - - Parameter menu
Indices: 2 + Control/gating unit
,BDS + Current control
Type: L2 ,K - Upread/free access
Changeable in:
- Ready to switch on
- Operation enabled
index1: 0 Menus:
Unit: - - Parameter menu
Indices: 2 + Control/gating unit
,BDS + Current control
Type: L2 ,K - Upread/free access
Changeable in:
- Ready to switch on
- Operation enabled
index1: 0 Menus:
Unit: - - Parameter menu
Indices: 2 + Control/gating unit
,BDS + Current control
Type: L2 ,K - Upread/free access
Changeable in:
- Ready to switch on
- Operation enabled
index1: Menus:
100,00 - Parameter menu
Min: 0,00 + Control/gating unit
Max: 200,00 + Current control
Unit: % - Upread/free access
Indices: 2 Changeable in:
Type: O2 - Ready to switch on
- Operation enabled
Init: 0 Menus:
Min: 0 - Parameter menu
Max: 1 + Control/gating unit
Unit: - + Current control
Indices: - - Upread/free access
Type: O2 Changeable in:
- Ready to switch on
Init: 0 Menus:
Unit: - - Parameter menu
Indices: - + Free blocks
Type: L2 ,K - Upread/free access
Changeable in:
- Ready to switch on
- Operation enabled
Init: 0 Menus:
Unit: - - Parameter menu
Indices: - + Free blocks
Type: L2 ,B - Upread/free access
Changeable in:
- Ready to switch on
- Operation enabled
Init: 0 Menus:
Unit: - - Parameter menu
Indices: - + Free blocks
Type: L2 ,B - Upread/free access
Changeable in:
- Ready to switch on
- Operation enabled
165