Writing Id; Ocxo Adjustment - Keysight E5071C ENA Service Manual

Adjustment
Required Adjustment after Replacing Assembly
Table 3-2 Over 8.5 GHz Options
Replaced Assembly
PCI-DSP Card (PCI/DSP)
Reference Oven Board (OCXO)
Analogue Base Module (BAS)
Synthesizer Module (SYN)
Receiver Module (RCV)
Doubler Module (DBL)
Distributor Module (DIS)
Imix (IMX)
Front End Module (FEM)
Hark Disk Drive (HDD)

Writing ID

This item writes the serial number and the option structure into the E5071C.
Required equipment for the writing ID
None

OCXO Adjustment

The purpose of this procedure is to adjust the 10 MHz OCXO.
Keysight E5071C ENA Network Analyzers
Adjustment Item
√
√
√ √
√
√
√ √ √
√ √ √ √
√ √
√ √ √
√ √ √
√ √ √
59