Dynamic Accuracy - 1 Mhz; Description; Test Equipment - Keysight E5071C ENA Service Manual

Network analyzers
Hide thumbs Also See for E5071C ENA:
Table of Contents

Advertisement

Performance Test

3. DYNAMIC ACCURACY - 1 MHz

3. DYNAMIC ACCURACY - 1 MHz

Description

This test checks the dynamic accuracy of the E5071C at 1 MHz. The dynamic
accuracy is tested at 1 MHz for each receiver port at 0, -10, -20, -30, -40, -50,
-60 using step attenuators. The following footnote will be added to the
measurement report to explain why the test does not test points below
-60dBm:
Dynamic Accuracy of a receiver consists of three regions: Compression, Linear,
and Noise & Crosstalk. Measurements below -60dBm are simply measuring
noise variability in the Noise & Crosstalk region rather than the true linearity of
the receiver! Since the receiver is linear by design at these lower levels, there is
no need to measure linearity below this threshold. Making measurements
above this threshold and below the compression region are sufficient to
warrant linearity performance of a receiver.

Test equipment

Test Equipment (DSG)
Power Meter (Power Meter 1)
Power Sensor 1 (Power Sensor RF 1)
Power Sensor 2 (Power Sensor RF 2)
10 dB Step Attenuator (10 dB Step
Attenuator 1)
Attenuator Switch Driver (Attenuator
Driver 1)
3.5 mm (f) to 3.5 mm (f) adapter (Adapter
3.5 mm: F-3.5 mm: F 1) (2 or 4 required)
3.5 mm Cable (cable 3.5 mm: M-3.5 mm:
M 1) (2 required)
44
1
1. The DSG (Device Substitution Group) is listed below the equipment description, if
applicable. These devices are required to be mapped in TME to execute a test.
DSGs require either GPIB communication or are important for dynamic measure-
ment uncertainty calculations. N/A refers to required equipment that is not mapped
as DSGs in TME.
2. Over 8.5 GHz are Options 2D5/2K5/4D5/4K5.
3. Up to 8.5 GHz are Options
230/235/430/435/240/245/440/445/260/265/460/465/280/285/480/485.
4. Two required for 2-port E5071C; four required for 4-port E5071C.
Model Number
N1914A
E9340A (Opt H18)
N8482A
8496G (Opt H52)
11713B
85027-60005
4
8121-1834
Keysight E5071C ENA Network Analyzers
Over 8.5
Up to
GHz
8.5 GHz
2
3
Option
Option
X
X
X
X
X
X
X
X
X
X
X
X

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents