B.system Recovery; System Recovery - Keysight E5071C ENA Service Manual

Keysight E5071C
ENA Network Analyzers
Service Manual
B

System Recovery

This appendix describes how to recover the operating system (Windows
operating system) when the operating system has been damaged.
System Recovery
By executing system recovery, you can return the system of the E5071C (the
Windows operating system) to the factory state (at the time of purchase
System recovery is a function of Windows and not a function of the
E5071C Firmware.
The system recovery procedure is different in accordance with the HDD
revision. The HDD revision can be checked using the following procedure:
Step 1. In E5071C, from Windows Start Menu, click on My Computer.
Step 2. The volume label for C: drive is displayed in Hard Disc Drive area.
Strictly follow the steps described below. If you do any operation other
than the following steps, the system may not be recovered.
1. If the hard disk failed and has been replaced after purchase, the state when the
replacement was performed is recovered.
295
1
).