Keysight E5071C ENA Service Manual page 200

Replacement Procedure
Replacing an Assembly
Refer to the following table for the tightening torque of screws if no torque is
specified by this chapter.
Screw
M2.5
M3
M3.5
M4
200
Driver Recommended Torque
T8 0.56 N-m ( 5.0 lb-in)
T10 1.02 N-m ( 9.0 lb-in)
T15 1.58 N-m (14.0 lb-in)
T20 2.37N-m (21.0 lb-in)
Keysight E5071C ENA Network Analyzers