Front Panel Cover Removal; Tools Required; Removal Procedure - Keysight E5071C ENA Service Manual

Replacement Procedure

Front Panel Cover Removal

Front Panel Cover Removal

Tools Required

•
•

Removal Procedure

Refer to
Step 1. Remove the outer cover as described in
Step 2. Remove the front panel as described in
Step 3. Disconnect the cables (item 1, 2, 3, 4) connected through the cover.
Step 4. Remove the six TORX T10 screws (item 5) fastening the cover.
Figure 6-38 Front Panel Cover Removal
270
TORX screwdriver, T10, T15, and T20
Flat edge screwdriver
Figure 6-38 for this procedure.
"Outer Cover Removal" on page
"Front Panel Removal" on page
Keysight E5071C ENA Network Analyzers
203.
204.