Frequency Reference Adjustment; Aux Input Adjustment; Synthesizer Gain Adjustment - Keysight E5071C ENA Service Manual

Adjustment
Required Adjustment after Replacing Assembly
Required equipment for OCXO adjustment
Description
Frequency Counter
Frequency Standard
BNC(m)-BNC(m) Cable, 61 cm

Frequency Reference Adjustment

The purpose of this procedure is to adjust the 10 MHz frequency reference on
the source board.
Required equipment for frequency reference adjustment
Description
Frequency Counter
Frequency Standard
BNC(m)-BNC(m) Cable, 61 cm

AUX Input Adjustment

The purpose of this procedure is to adjust the offset error and proportional
error of AUX Input.
Required equipment for the AUX input adjustment
Description
Function Generator
Multi Meter
BNC(m)-BNC(m) Cable, 61 cm x 4 ea
BNC T Adapter x 2ea
Banana BNC

Synthesizer Gain Adjustment

The purpose of this procedure is to adjust 2Bit ATT of RF Path in Synthesizer for
Source.
60
Recommended Model
Keysight 53181A with Opt. 010 and 124 or
Keysight 53131/2A with Opt. 010 and 124
Symmetricom 5071A
Keysight p/n 8120-1839
Recommended Model
Keysight 53181A with Opt. 010 and 124 or
Keysight 53131/2A with Opt. 010 and 124
Symmetricom 5071A
Keysight p/n 8120-1839
Recommended Model
Keysight 33120A or 33250A
Keysight 34401, 34410, 34411 or 3458A
Keysight p/n 8120-1839
Common Parts
Common Parts
Keysight E5071C ENA Network Analyzers