Organization Of Service Manual - Keysight E5071C ENA Service Manual

General Information

Organization of Service Manual

Organization of Service Manual
Tabs are used to divide the major chapter and appendix of this manual. The
contents of each chapter and appendix in this manual is as follows:
Chapter 1, "General Information,"
Chapter 2, "Performance Test,"
Chapter 3, "Adjustment,"
Chapter 4, "Troubleshooting,"
Chapter 5, "Replaceable Parts,"
Chapter 6, "Replacement Procedure,"
Chapter 7, "Post-Repair Procedures,"
Appendix A , "Manual Changes,"
Appendix B , "System Recovery,"
Appendix C , "Firmware Update,"
Keysight E5071C ENA Network Analyzers
The Service Manual is a guide to servicing the E5071C ENA Series Network
Analyzer. The manual contains information requisite to do performance tests,
adjustments, troubleshooting, and repairs.
This chapter provides information on how to verify the E5071C performance.
This chapter provides the adjustment information for the E5071C ENA Series
Network Analyzer to ensure that it is within its specifications. The adjustment must
be performed Keysight's qualified service personnel. If you need the adjustment for
your E5071C, it should be sent to the nearest Keysight Technologies service office.
This chapter provides procedure to isolate a faulty assembly in the E5071C Network
Analyzer.
This chapter contains information for ordering replacement parts for the E5071C
ENA Series RF Network Analyzers.
This chapter provides procedure for removing and replacing the major assemblies
in the E5071C ENA Series Network Analyzer.
This chapter lists the procedures required to verify the E5071C operation after an
assembly is replaced with a new one.
This appendix contains the information required to adapt this manual to versions or
configurations of the E5071C manufactured earlier than the current printing date of
this manual. The information in this manual applies directly to E5071C units with
the serial number that is printed on the title page of this manual.
This appendix describes how to recover the operating system (Windows operating
system) when the operating system has been damaged.
19