Handler I/O Board Replacement (A23); Tools Required; Removal Procedure - Keysight E5071C ENA Service Manual

Network analyzers

Hide thumbs Also See for E5071C ENA:

Table of Contents

Replacement Procedure

Handler I/O Board Replacement (A23)

Step 1. Remove the outer cover as described in

Step 2. Disconnect the flat cable (item 1) from the handler I/O board.

Step 3. Remove the two TORX T10 screws (item 2) fastening the handler I/O board.

Step 4. Slide the handler I/O board toward backward (item 3).

TORX screwdriver, T10, T15, and T20

for this procedure.

"Outer Cover Removal" on page

Keysight E5071C ENA Network Analyzers

Show Quick Links

Table of Contents