Removable Hard Disk Drive Replacement (Obsolete); Tools Required; Removal Procedure - Keysight E5071C ENA Service Manual

Replacement Procedure

Removable Hard Disk Drive Replacement (Obsolete)

Removable Hard Disk Drive Replacement (Obsolete)

Tools Required

•
•

Removal procedure

Refer to
Step 1. Insert the key (P/N 0960-2562) in the lock and turn clockwise (item 1).
Step 2. Press the button under the lock (item 2) and remove the hard disk (item 3).
Step 3. Remove the four TORX T10 screws (item 4), and remove the removable hard
disk drive's lid (item 5).
Step 4. Remove the four TORX T10 screws (item 6) fastening the HDD bracket and
remove it.
Step 5. Remove the hard disk drive (item 7) from the connector board.
Figure 6-4 Removable Hard Disk Drive Removal (Obsolete)
206
TORX screwdriver, T10
Torque screwdriver, TORX T10 (set to 0.29 N-m / 2.6 lb-in)
Figure 6-4 for this procedure.
Keysight E5071C ENA Network Analyzers