Notes On Executing The Factory Recovery Function - Keysight E5071C ENA Service Manual

System Recovery
System Recovery

Notes on executing the factory recovery function

Executing the factory recovery function causes the following conditions:
In addition to the Windows operating system, the following settings of the
o
E5071C are returned to the factory state.
•
•
•
The driver for the supported printer installed after purchase is deleted.
o
You need to execute initial registration again.
o
The firmware revision you installed remains even if you perform factory
o
recovery.
Files you created using the save function (files in the D drive) are not affected,
but we recommend backing them up before executing system recovery for
precautionary purposes. For more information on backup, refer to "Backing Up
the Data" as described in E5071C Online Help.
Keysight E5071C Service Manual
Network setting
GPIB setting
Printer setting
-297