Removable Hard Disk Drive Replacement Option 017; Tools Required; Removal Procedure - Keysight E5071C ENA Service Manual

Replacement Procedure

Removable Hard Disk Drive Replacement Option 017

Removable Hard Disk Drive Replacement Option 017

Tools Required

•
•

Removal procedure

Refer to
Step 1. Insert the key (P/N 1390-1375) in the lock and turn clockwise (item 1).
Step 2. Slacken the screw (item 2), then press the button (item 3) and remove the
hard disk (item 4).
Step 3. Remove the four TORX T10 screws (item 5), and remove the removable hard
disk drive's lid (item 6).
Step 4. Remove the four TORX T10 screws (item 7) fastening the HDD bracket and
remove it.
Step 5. Remove the hard disk drive (item 8) from the connector board.
From the volume label CN925, user recovery function is not prepared. It is
required to inform this change to user before replacing the hard disk drive.
Keysight E5071C ENA Network Analyzers
TORX screwdriver, T10
Torque screwdriver, TORX T10 (set to 0.50 N-m / 4.4 lb-in)
Figure 6-8 for this procedure.
211