Required Adjustment After Replacing Assembly; Writing Id - Keysight E5052B Service Manual

Required Adjustment after Replacing Assembly

After replacing the following assembly, the adjustment items described in
be required. The adjustment must be performed by Keysight's qualified service personnel.
If you need the adjustment for your E5052B, it should be sent to the nearest Keysight
Technologies service office.
Table 3-1 Required Adjustment Item after Replacing Assembly
Replaced Assembly
A1 Freq/Power Det.
A2 DC Source
A3 ADC/DSP
A4/A5 Local Synt
A6 Phase Det
HDD
A21 PCI DSP Card

Writing ID

This item writes the serial number and the option structure into the E5052B.
Required equipment for the writing ID
None
Chapter 3
Required Adjustment after Replacing Assembly
Adjustment Item
  
  
  
  
  
     

      
  
  
  
      
Adjustment
Table 3-1 must
   
   
   
   
   
43