To Configure The Cpu Mother Board Assembly And Bios; Testing Dram On The Motherboard - Keysight E5071C ENA Service Manual

Troubleshooting

To configure the CPU Mother Board Assembly and BIOS

To configure the CPU Mother Board Assembly and BIOS
When you replace the CPU Mother Board Assembly, you need to confirm the
BIOS options using the BIOS setup utility procedure. The BIOS setup procedure
is described in

Testing DRAM on the Motherboard

When the CPU Mother Board Assembly is replaced with a new one, it is
advisable to perform the DRAM test before proceeding to the BIOS setup utility
procedure. Confirm the DRAM count in accordance with the following
procedure.
Step 1. Connect the external keyboard and mouse to the E5071C rear panel
connectors.
Step 2. Turn the instrument on. Wait until the E5071C boots up. Do not press any key
until the E5071C measurement view appears.
Step 3. Press
Step 4. Click Misc Setup in the softkey menu.
Step 5. Click Control Panel... in the softkey menu.
Step 6. Scroll the function viewer to find "System" icon and double-click "System".
This opens "System Properties" window as shown in
Figure 4-27 System Properties window
Keysight E5071C ENA Network Analyzers
"To Confirm or Set the BIOS Options" on page
key on the front panel.
116.
Figure 4-27.
115