System Recovery
Initial Registration of E5071C
Initial Registration of E5071C
When you start up the E5071C at the first time, you need to perform the initial
registration of the Windows XP operating system of the E5071C. There are two
procedures in accordance with the HDD revision.
It is not possible to check the HDD revision installed on your E5071C
before Windows is booted. Therefore you should follow the procedure
which you see on the E5071C.
You cannot use the front panel keys during the initial registration of the
E5071C therefore connect the mouse and the keyboard before turning on
the power.
If you perform the following procedure incorrectly, a message asking you
whether to return to the previous registration screen and perform the
registration appears. In this case, follow the instruction to return to the
previous registration screen.
Initial Registration Procedure (HDD Revision: CFxxx or CHxxx)
Step 1. Turn on the E5071C. Do not touch any key on the front panel during boot up.
Step 2. The screen as shown in
and press Enter.
Figure B-14
System start up screen (1/3)
Keysight E5071C Service Manual
Figure B-14
appears. Select Windows XP Professional
-323