Keysight E5071C ENA Service Manual page 117

Troubleshooting
To configure the CPU Mother Board Assembly and BIOS
Table 4-18 BIOS Options
Digital
Motherboard
Part Number
E5070-62090
E5070-62091
E5071-62060
Run the BIOS setup utility to load Setup Default
Procedure
Step 1. Connect the external keyboard to the E5071C rear panel USB connector.
Step 2. Turn the instrument on.
Step 3. Press [F2] key as soon as the splash screen as shown in
displayed. Wait a few seconds until the message "Enter CURRENT
Password:" appears.
Step 4. Press
Step 5. Enter password "e507xa" and press
is displayed as shown in
Keysight E5071C ENA Network Analyzers
CPU
Core i7 2.53 GHz
Core i7 2.53 GHz
Core i5 3.00 GHz
key (The LED in the key lights.)
Figure
Unit Prefix BIOS
at Factory Password
Shipment
MY463/4, No password
SG463/4
MY465/6, No password
SG465/6
MY467, No password
SG467
. Then BIOS setup utility main menu
4-28.
BIOS Setup
After Digital
Motherboard
Replacement
Not necessary
Not necessary
Not necessary
Figure 4-5 is
117