Sense Resistance Using An Id Resistor - Keysight N2820A User Manual

3 Using N2825A Probe Heads
To Identify the R
SENSE
To Identify the R
54
Resistance Using a Unique Name
Resistance Using a Unique Name
SENSE
This procedure is for Infiniium oscilloscopes, only. InfiniiVision
NOTE
oscilloscopes do not support the assigning of names to identify
N2825A/R
This procedure allows you to identify the external DUT-mounted
R
SENSE
connect the probe with the N2825A probe head, and select the
unique name on the oscilloscope. The proper R
for the measurements. Selecting a unique name is easier than
manually entering the R
N2825A head with a new R
1 Click the Setup > Probe Configuration menu command to view the
Probe Configuration dialog box.
2 Use the Add Head field to assign a unique name for each of your
N2825A/R
3 Each time that you connect the probe, select the appropriate name
in the dialog box.
combinations.
SENSE
by a unique name. After completing the procedure, simply
SENSE
SENSE
resistance associations.
SENSE
SENSE
resistance each time that you use the
.
N2820/1A User's Guide
value is used