Keysight E5071C ENA Service Manual page 52

Performance Test
10. DYNAMIC ACCURACY - 1.195 GHz
Type-N (m) t o 3.5 mm (m) adapter
(2 required)
3.5 mm (f) to 3.5 mm (f) adapter
(2 or 4 required)
52
4
1. The DSG (Device Substitution Group) is listed below the equipment description,
if applicable. These devices are required to be mapped in TME to execute a test.
DSGs require either GPIB communication or are important for dynamic mea-
surement uncertainty calculations. N/A refers to required equipment that is not
mapped as DSGs in TME.
2. Over 8.5 GHz are Options 2D5/2K5/4D5/4K5.
3. Up to 8.5 GHz are Options
230/235/430/435/240/245/440/445/260/265/460/465/280/285/480/485.
4. Two required for 2-port E5071C; four required for 4-port E5071C.
1250-2879 X
85027-60005 X
Keysight E5071C ENA Network Analyzers