Replacement Procedure - Keysight E5071C ENA Service Manual

Replacement Procedure

Removable Hard Disk Drive Replacement Option 017
Figure 6-8 Removable Hard Disk Drive Removal Option 017
Replacement Procedure
Step 1. Replace the removable hard disk drive by inverse procedure of removal.
Fasten the TORX T10 screws (item 7) using a torque screwdriver.
Step 2. Insert the hard disk into the slot.
Step 3. Turn the key to the left until it is locked, then remove the key.
Step 4. Restore backup files onto the new removable hard disk drive as described in
"Restore Backup Files onto the New Hard Disk Drive" on page
Step 5. Calibrate the touch screen as described in
on page
212
208.
"Calibration of the Touch Screen"
Keysight E5071C ENA Network Analyzers
207.