Figure 1-10 Status Message Before Toggle Id Is Selected; Figure 1-11 Status Message When Toggle Id Is Selected - Keysight N1911A User Manual

1 Introduction
Figure 1-10
Figure 1-11
When power meter is configured to LAN, the Lan Status on
screen will show the LAN error condition and status of the LAN configuration
connection. There are six types of Lan Status messages that may occur. See
Table
52
Status message before Toggle ID is selected.
Status message when Toggle ID is selected.
1-1. See also Figure 1-12 for the example of Lan Status message.
Keysight N1911A/1912A User's Guide
Status message
"LAN identity start" to
blink 3 times when
Toggle ID is selected.
Remote Interfaces