Keysight E5071C ENA Service Manual page 288

Post-Repair Procedures
Post-Repair Procedures
Table 7-2 Post-Repair Procedures for Analog Assemblies for Over 8.5 GHz
Options
Replaced
Assembly or
Part
Card (A51)
Reference
Oven Board
(A5)
Analog Base
Module (A6)
288
Required Adjustments
Correction Constants
(CC)
PCI-DSP Perform the following
required adjustment.
- Write ID
- Save to Flash memory
Perform the following
required adjustment.
- OCXO
Perform the following
required adjustment.
- AUX Input
- Frequency Reference
Verification
Perform "To Execute the diagnostics
Test" on page 80
Perform the following performance test.
- AUX Input Test
- Frequency Accuracy Test
- RF Output Level Accuracy and Flatness
Test
- RF Output Level Linearity Test
- Trace Noise Test
- Crosstalk Test
- System Dynamic Range Test
- Noise Floor Test
- Dynamic Accuracy Test
- Uncorrected System Performance Test
Perform "To Check the External
Trigger Input" on page 99
Perform "To Execute the diagnostics
Test" on page 80
Perform the following performance test.
- Frequency Accuracy Test
Perform "To Execute the diagnostics
Test" on page 80
Perform the following performance test.
- AUX Input Test
- Frequency Accuracy Test
Keysight E5071C ENA Network Analyzers