Keysight E5071C ENA Service Manual page 353

Messages
Error Messages
-286 Program runtime error
An error occurring when VBA is executed.
Q
-430 Query DEADLOCKED
The state that generates a "DEADLOCKED" Query error (see 6.3.1.7,
IEEE488.2). This error occurs when both input and output buffers have become
full, preventing the instrument from continuing processing, for example.
-400 Query error
A comprehensive query error has occurred showing that this instrument cannot
detect a more detailed error. This code simply shows that a query error defined
in 11.5.1.1.7 and 6.3, IEEE488.2 has occurred.
-410 Query INTERRUPTED
The state that generates a "INTERRUPTED" Query error (see 6.3.2.3,
IEEE488.1). This error occurs when data bytes (DAB) or GET are received before
the transmission of the response after a query has not been completed, for
example.
-420 Query UNTERMINATED
The state that generates an "UNTERMINATED" Query error (see 6.3.2,
IEEE488.2). This error occurs when this instrument is designated as the talker
and an incomplete program message is received, for example.
-440 Query UNTERMINATED after indefinite response
After a query asking for an indefinite response has been run, another query is
received in the same program message (See 6.5.7.5.7, IEEE488.2).
-350 Queue overflow
The queue contains a specific code in place of the code which caused this
error. The code indicates that the error occurred because of no space available
in the queue, but the error is not recorded.
R
105 Recall failed
This error occurs when reading an instrument status file (State01.sta, etc.)
(MMEM:LOAD:STAT command) fails.
Keysight E5071C Service Manual -353