Siemens SINUMERIK Series Operating Manual page 34

Introduction
2.2 Operator panel fronts
34
<DEL> + <CTRL>
● Editing box
Deletes the first word to the right of the cursor.
● Navigation
Deletes all characters.
<Spacebar>
● Editing box
Inserts a space.
● Switches between several specified options in selection lists and
in selection boxes.
<Plus>
● Opens a directory which contains the element.
● Increases the size of the graphic view for simulation and traces.
<Minus>
● Closes a directory which contains the element.
● Reduces the size of the graphic view for simulation and traces.
<Equals>
Opens the calculator in the entry fields.
<Asterisk>
Opens a directory with all of the subdirectories.
<Tilde>
Changes the sign of a number between plus and minus.
<INSERT>
● Opens an editing window in the insert mode. Pressing the key
again, exits the window and the entries are undone.
● Opens a selection box and shows the selection possibilities.
● In the machining step program, enters an empty line for G code.
● Changes into the double editor or into the multi-channel view from
the edit mode into the operating mode. You can return to the edit
mode by pressing the key again.
+ <INSERT> + <SHIFT>
For G code programming, for a cycle call activates or deactivates
the edit mode.
Operating Manual, 08/2018, 6FC5398-7CP41-0BA0
Milling