Siemens SINUMERIK Series Operating Manual page 186

Execution in manual mode
5.8 Simple workpiece machining operations with milling/turning machines
Parameters
T
D
TC
β
Tool
γ
αC
F
S / V
Spindle M function
Machining
Position
186
Description
Tool name
Cutting edge number
Name of the swivel data record
Angle of the tool to the axis of rotation
β = 0°
β = 90°
Input value The required angle can be freely entered
Hirth gearing
Round of β to the next Hirth gearing
Round of β to the next Hirth gearing
Round of β to the next Hirth gearing
Tool tip when swiveling
● Tracking
The position of the tool tip is maintained during swiveling.
● No tracking
The position of the tool tip is not maintained during swiveling.
Angle of rotation of the tool around itself
Alignment of the plane of rotation in the pole position
Feedrate
Spindle speed or constant cutting rate
Direction of spindle rotation (only when ShopMill is not active)
●
●
● ∇ (roughing)
● ∇∇∇ (finishing)
Machining position
Operating Manual, 08/2018, 6FC5398-7CP41-0BA0
Unit
degrees
degrees
degrees
mm/rev
rpm
m/min
Milling