Siemens SINUMERIK Series Operating Manual page 66

Introduction
2.4 User interface
Searching for a topic
Displaying alarm descriptions and machine data
Displaying and inserting a G code command in the editor
66
5. Press the <Follow reference> softkey or the <INPUT> key to display the
help page for the selected topic.
6. Press the "Current topic" softkey to return to the original help.
1. Press the "Search" softkey.
The "Search in Help for: " window appears.
2. Activate the "Full text " checkbox to search in all help pages.
If the checkbox is not activated, a search is performed in the table of
contents and in the index.
3. Enter the desired keyword in the "Text" field and press the "OK" softkey.
If you enter the search term on the operator panel, replace an umlaut
(accented character) by an asterisk (*) as dummy.
All entered terms and sentences are sought with an AND operation. In
this way, only documents and entries that satisfy all the search criteria
are displayed.
4. Press the "Keyword index" softkey if you only want to display the index
of the operating and programming manual.
1. If messages or alarms are pending in the "Alarms", "Messages" or "Alarm
Log" window, position the cursor at the appropriate display and press
<HELP> or key <F12>
The associated alarm description is displayed.
2. If you are in the "Start-up" operating area in the windows for the display
of the machine, setting and drive data, position the cursor on the desired
machine data or drive parameter and press the <HELP> key or <F12>
key.
The associated data description is displayed.
1. A program is opened in the editor.
Position the cursor on the desired G code command and press the
<HELP> or the <F12> key.
The associated G code description is displayed.
2. Press the "Display all G functions" softkey.
3. With the aid of the search function, select, for example, the desired G
code command.
Operating Manual, 08/2018, 6FC5398-7CP41-0BA0
Milling