Siemens SINUMERIK Series Operating Manual page 650

Programming technological functions (cycles)
10.6 Further cycles and functions
Parameter Description
Machining
● ∇ (roughing)
● ∇∇ (semi-finishing)
● ∇∇∇ (finishing)
● Deselection
Mold-making
● Advanced Surface
function
● Top Surface
Note
The field can be hidden.
Please observe the information provided by the machine manufacturer.
Contour tolerance ● Input of the maximum allowance from the programmed contour.
● Standard default values depending on the type of machining via the "Default
values" softkey:
–
–
–
Note
The default values may have been changed by the manufacturer.
Please observe the information provided by the machine manufacturer.
Smoothing (not
● Yes
for "Advanced
Optimized path within the contour tolerance
Surface")
● No
Path close to contour
Note
The field can be hidden.
Please observe the information provided by the machine manufacturer.
Multi-axis Multi-axis program for 5-axis machines
program
● Yes
The orientation tolerance > 0 degrees can be entered here
● No
The value 1 is entered automatically
Note
The field can be hidden.
Please observe the information provided by the machine manufacturer.
ORI tolerance Specification of the maximum allowance from the programmed tool orientation (for 5-
axis machines).
650
∇ (roughing) 0.100
∇∇ (pre-finishing) 0.050
∇∇∇ (finishing) 0.010
Operating Manual, 08/2018, 6FC5398-7CP41-0BA0
Unit
Milling