Changing An Imported Autocad File - Siemens DMS8000 MP4.60 Manual

3.8.3
Building Technologies
Fire Safety & Security Products
The color association is set by default using a direct correspondence with of the
MM8000 event categories (event lamps). You can customise this default settings
by acting on the Customize Category Color button and choosing a color-pair (light
and dark, as blinking requires two colors) for each category. You can use the dark
color only if blinking is not set.
Color association customization

Changing an imported AutoCAD file

To change an AutoCAD file, proceed as follows:
1. Select the CAD object on the map.
Note: You may need to zoom out to do this.
2. Right-click to display the CAD Property window.
3. Select the File name tab.
4. Select the browse icon
5. Select the new CAD file and then click Open.
 A message displays informing you the AutoCAD file has been updated, and
the action to take to display it.
Note: You can also change the Background color in this tab.
6. Close the map and open it again to display the updated CAD file.
CAD Property window – File name tab
Guide to map configuration
Modifying graphic object properties
to open the browsing window.
3
29
A6V10062441_a_en
30.06.2013