Siemens SINUMERIK Series Operating Manual page 150

Setting up the machine
4.8 Zero offsets
Note
Settings for rotation, scaling and mirroring are specified here and can only be changed here.
Tool details
You can display the following details for the tool and wear data for tools:
● TC
● Adapter dimension
● Length / length wear
● EC setup correction
● SC sum correction
● Total length
● Radius / radius wear
Procedure
150
You can also change the display of the tool correction values between the Ma‐
chine Coordinate System and the Workpiece Coordinate System.
Machine manufacturer
Please refer to the machine manufacturer's specifications.
1. Select the "Parameter" operating area.
2. Press the "Zero offset" softkey.
3. Press the "Active", "Base" or "G54...G599" softkey.
The corresponding window opens.
4. Place the cursor on the desired zero offset to view its details.
5. Press the "Details" softkey.
A window opens, depending on the selected zero offset, e.g. "Zero Offset
- Details: G54 to G599".
Operating Manual, 08/2018, 6FC5398-7CP41-0BA0
Milling