Selecting limits
Press the respective softkey for the required limit.
The selected limits are shown in the help screen and in the broken-line graphics.
Procedure
Parameters, G code program
PL
Machining plane
RP
Retraction plane
SC
Safety clearance
F
Feedrate
Milling
Operating Manual, 08/2018, 6FC5398-7CP41-0BA0
Left
Top
Bottom
Right
1.
The part program or ShopMill program to be processed has been created
and you are in the editor.
2.
Press the "Milling" softkey.
3.
Press the "Face milling" softkey.
The "Face Milling" input window opens.
mm
mm
*
Programming technological functions (cycles)
Parameters, ShopMill program
T
Tool name
D
Cutting edge number
F
Feedrate
S / V
Spindle speed or constant cutting
rate
10.2 Milling
mm/min
mm/tooth
rpm
m/min
421