Siemens SINUMERIK Series Operating Manual page 438

Programming technological functions (cycles)
10.2 Milling
Procedure
Parameters in the "Input complete" mode
Parameters, G code program
Input
PL Machining plane
Milling direction
RP Retraction plane
SC Safety clearance
F Feedrate
Parameter Description
FZ Depth infeed rate
(only for G code)
Reference point The following different reference point positions can be selected:
●
●
●
●
●
Machining
● ∇ (roughing)
● ∇∇∇ (finishing)
● Chamfering
Machining posi‐
● Single position
tion
A rectangular spigot is machined at the programmed position (X0, Y0, Z0).
● Position pattern
Several rectangular spigots are machined in a position pattern
(e.g. full circle, pitch circle, grid, etc.).
438
1. The part program or ShopMill program to be processed has been created
and you are in the editor.
2. Press the "Milling" softkey.
3. Press the "Multi-edge spigot" and "Rectangular spigot" softkeys.
The "Rectangular Spigot" input window opens.
● complete
mm
mm
*
(center)
(bottom left)
(bottom right)
(top left)
(top right)
Parameters, ShopMill program
T Tool name
D Cutting edge number
F Feedrate
S / V Spindle speed or constant cutting
rate
Operating Manual, 08/2018, 6FC5398-7CP41-0BA0
mm/min
mm/tooth
rpm
m/min
Unit
*
Milling