Siemens SINUMERIK Series Operating Manual page 266
Milling
Hide thumbs
Also See for SINUMERIK Series:
- Function manual (956 pages) ,
- Function manual (62 pages) ,
- Function manual (332 pages)
Table of Contents
Advertisement
Machining the workpiece
6.16 Displaying the program runtime and counting workpieces
Procedure
See also
Specifying the number of workpieces (Page 341)
266
1.
Select the "Machine" operating area.
2.
Press the <AUTO> key.
3.
Press the "Times, Counter" softkey.
The "Times, Counter" window opens.
4.
Select "Yes" under "Count workpieces" if you want to count completed
workpieces.
5.
Enter the number of workpieces needed in the "Desired workpieces" field.
The number of workpieces already finished is displayed in "Actual work‐
pieces". You can correct this value when required.
After the defined number of workpieces is reached, the current workpie‐
ces display is automatically reset to zero.
Operating Manual, 08/2018, 6FC5398-7CP41-0BA0
Milling
Advertisement
Table of Contents
