Siemens SINUMERIK Series Operating Manual page 625

Parameter Description
Preferred direction Preferred direction of the swivel axis for several possible alignments of the machine
(for ShopMill pro‐
gram)
FX Feedrate in X direction
FZ Feedrate in Z direction
Machining
● ∇ (roughing)
● ∇∇∇ (finishing)
● ∇+∇∇∇ (complete machining)
Machining ● face
direction
● longitudinal
RP Retraction plane – (only for machining direction, longitudinal, inner)
Position
● front
● back
● inside
● outside
D Maximum depth infeed - (only for ∇)
XDA First grooving limit tool (abs) – (only for face machining direction)
XDB Second grooving limit tool (abs) – (only for face machining direction)
UX or U Finishing allowance in X or finishing allowance in X and Z – (only for ∇)
UZ Finishing allowance in Z – (only for UX)
BL Blank description (only for ∇)
● Cylinder (described using XD, ZD)
● Allowance (XD and ZD on the finished part contour)
● Contour (additional CYCLE62 call with blank contour – e.g. cast iron mold)
XD - (only for ∇ machining)
- (only for blank description, cylinder and allowance)
● For blank description, cylinder
● For blank description, allowance
Milling
Operating Manual, 08/2018, 6FC5398-7CP41-0BA0
– Version, absolute:
Cylinder dimension ∅ (abs)
– Version incremental:
Allowance (inc) to maximum values of the CYCLE62 finished part contour
– Allowance on the CYCLE62 finished part contour (inc)
Programming technological functions (cycles)
10.5 Contour turning - Milling/turning machine
Unit
*
*
mm
mm
mm
mm
mm
mm
mm
625